After the control power of the agricultural plant protection drone is turned on, the ground station cannot receive the data from the drone:
Check whether the connection connector is loose or not connected, whether you click the link button of the ground station, whether the serial port is set correctly, whether the serial port baud rate is set correctly, whether the data transmission channel of the ground station and the aircraft are set the same, and whether the GPS data on the aircraft is Sent into the flight control, as long as there is a problem in one link, it will not be able to communicate, and then reconnect after checking the error. If the connection still fails after the check is correct, restart the ground station computer and the power supply of the aircraft system. Generally, the communication can be connected.
